Lab Photos

I've been taking a lot of photographs in lab to post on Tumblr, as a quick way to share my work in the lab. Here is a recent collection of my favorites.

My bacteria have a habit of spelling out scientific messages, but this time they took it to a new level!

A plasmid DNA resuspension. Black permanent marker outlines the pelleted DNA from an ethanol precipitation at the bottom of three tubes, a trick I’ve started to use in order to aid the resuspension of DNA into a smaller, more concentrated volume. The outline allows me to precisely add a very small amount of buffer to the pelleted DNA, as it sits taped at an angle to a pipet tip box.

After completing a set of inducible expression plasmids which I transformed cultures of diatoms with this past week, it was time to throw out several months worth of agar plates. These agar plates were home to different lines of E. coli which I used to clone different parts of my plasmids. Now that I have glycerol stocks of these E. coli lines (frozen stocks of bacteria cultures stored at -80°C), I was able to clean out my bin of agar plates. Not only did it feel good to get rid of so many plates, but this is an exciting stage in my project as it starts in a new direction.

Genetically transformed diatoms scatter the surface of a selective agar plate. The agar plate, specially formulated to support the growth of the microscopic algae, is made with the antibiotic ClonNAT which is strong enough to prevent the growth of diatoms without a resistance plasmid. The genetic transformation was a co-transformation of a pair of plasmids: the inducible expression plasmid which we will use for genetic regulation tests, and a resistance plasmid for ClonNAT resistance.

This is a new “invention” I came up with the other day in lab: a simple pen/marker holder. While it’s only big enough for 2-3 markers, it’s perfect for our lab benches because our permanent markers wander off. This way our markers stay put on one side of the lab bench. I used clean (but previously used) 50mL conical tubes with a bit of lab tape.

DUN DUN DUN: DIATOM TRANSFORMATION (video edition)

I TRANSFORMED MY DIATOMS. ALL IS WELL. THIS IS AWESOME.

Well of course that is if we successfully transformed the diatoms. There's a 1-2 week grow period during which we have to wait in order to see transformed clones. I'll keep this blog posted and will post a text post regarding the transformation soon as well.

Tumblr & Science

I've created a Tumblr page to post cool pictures from lab to run along side my blog here about my project and you should really check it out:

This is where I post stuff like this that I've made:

But really, I should be posting cool stuff like that here as well, which I will do in the future.

Building inducible expression plasmids (aka Science)

Below is a video I've been trying to publish for a long time coming this summer, but because my summer project only came to a close this week, I've been hesitant to post anything.



In this video, I give an update on my lab work and discuss my overall lab project, which is a great review for myself and my viewers. This is an exciting time for me at Clark University, because I’m beginning the real stages of becoming a graduate student in our accelerated Master’s program. After conducting undergraduate research, I’m using it to support a 5th year of schooling at Clark to finish up my Master’s.

My project concerns the 3’ UTR of the nitrogen-assimilating genes nitrate reductase and nitrite reductase in diatoms (if you haven't read up on my blog before), because we have evidence that along this region these genes are up- and down-regulated by environmental conditions. To test this hypothesis, I’ve created plasmids that drive expression of a reporter gene (GFP) with promoter and terminator regions derived from diatom genes. We’ll compare the activity of GFP with differing 3’ UTR elements to determine whether this region of the nitrogen-assimilating genes is crucial in their regulation.

For the gene nitrate reductase, this is old news. But it is news for my blog that I've completed the plasmids for nitrite reductase, which is really the story of my video.

I'm really excited to be where I am in my project. This week, I hope to genetically transform my diatoms with the plasmids I've created. Oh baby Darwin, this could be a HUGE week for me and my scientific career! I'll be back soon with transformation news.

The completion of my NiR plasmids

This summer's project has been to complete inducible expression plasmids to test the regulation of nitrite reductase (NiR) in the diatom Thalassiosira pseudonana. Inducible expression means we can induce the expression of a gene located on a plasmid based on environmental factors. These plasmids will be used to test whether the 3' end of the NiR plays a role in regulation the gene's activity based on environmental cues. We'll compare the activity of our reporter gene (GFP) from our control plasmid (with an NiR terminating region) and our developing experimental plasmid (with an Actin terminating region, as actin has no role with nitrogen assimilation).

An analytical double digest and gel to determine which of my bacteria colonies actually had the plasmid I wanted. My colony screen gave me some funny results, so I wanted to double check with a digest. The digest confirmed several of my colonies appear to have the plasmid and correct insert, giving me the green light to grow up more bacteria cultures and prep and purify their plasmids.

While it appears my NiR-NiR plasmid is completed (sections of the NiR gene flank the reporter gene in the plasmid), the completion of the experimental plasmid is right behind the control plasmid. Today I transformed some bacteria with what I hope is the complete experimental plasmid. I should know by tomorrow afternoon if I have what I think I do!

Meanwhile, I have scheduled a date at the University of Rhode Island to transform my diatoms! While I may only transform the diatoms with my set of nitrate reductase (NR, a different but related gene) plasmids (both with an NR terminus and an actin terminus, like the NiR plasmids I'm finishing up now).

This DNA has a sequence and I have every intention to find out what it is! (and other stories)

In my quest to amplify a region of the nitrite reductase (NiR) gene that I can then ligate into a plasmid for in vivo testing, I needed to sequence my portion of DNA for three main reasons:

1. I needed to make sure that the restriction sites I added with gene specific primers were added to either end of the sequence. These restriction sites will allow me to cut out my amplified piece of DNA that is cloned into a cloning vector.
2. I need to verify that the sequence of DNA I've been cloning is indeed from the NiR gene, especially since the DNA sequence has been marginally longer on my agarose gels than anticipated.
3. Previous data acquired from a database told me I should be able to get a restriction enzyme to cut somewhere in the middle of the DNA sequence I had cloned, but the restriction enzyme wouldn't cut in the middle (but it did cut on either side of the DNA sequence that I cloned into a vector, as the vector had that restriction site on either side of the multiple cloning site). Essentially, that restriction site didn't exist in my DNA sequence like it should have.

So, couple weeks ago, I performed a PCR cycle sequencing reaction to start the process of sequencing. The purpose of this sequencing reaction is to amplify a region of DNA with DNA bases that have special tags. These tags are read by a sequencing machine yielding a series of base signals like below:

The color coded lines refer to a single base category (either A, T, G or C) and denote the signal strength at that spot in the sequence. Based on the predominant signal at a spot in the sequence, the software makes a judgment call as to which base is present at that location. Often it is quite clear to the machine and software that a particular letter of DNA is certainly an A at a specific location because there is a single strong signal peak. Other times there may be several signal peaks at a single location because of a lower quality sequencing reaction (e.g. there is too much or too little DNA to be read properly), which make it harder to determine which DNA letter actually exists in the DNA sequence.

In order for the DNA to be read by the sequencing machine, it needs to be single stranded. This means we make up separate PCR reactions with only one primer, which means that the one primer in a PCR reaction will attach to the DNA and copy the DNA until it falls off. To make it easier on myself, I followed a standard protocol that sequences a section of DNA that has been cloned into a plasmid vector. This way there is a buffer of vector plasmid sequence on either side of my DNA sequence of interest, where the primers that pair with the vector plasmid would bind.

I performed my PCR reaction and prepared it for the sequencing machine and was about to load my DNA onto the DNA sequencing plate (which goes into the machine), when I was notified that the machine was down and I couldn't sequence that day or possibly for the rest of the week. It took me a week or more for my samples to get read, but they finally did get read and my sequences were good enough to give me some answers.

I use a special computer program that will align the DNA sequences to one another. Running multiple samples of the same sequence will allow the program to compare answers and yield a single, best result sequence. Interestingly enough, while my four samples all matched each other, there was a small region (about 20 bases) that did not match up with the database sequence for my gene. This may have been why my restriction site wouldn't cut--because it wasn't there. One of my labmates is going to sequence the same gene soon, so I will be able to compare my results with hers and determine whether the predicted sequence in the database needs to be updated.

I can then take the sequence from the first program (the results) and pop it into another program, to quickly find all of the restriction sites that are present.

Here I can see that my BamHI and NotI restriction sites are indeed at either end of my sequence, with the EcoRI sites just outside of the Bam and Not sites. Because the EcoRI sites are in the vector which I cloned my sequence with, I know that the Bam and Not sites are on either side of my sequence like they should be.

At present I have ligated this section of DNA (the piece of the NiR gene) with the other portion of the NiR plasmid, and will transform some bacteria today. If the plasmid worked and was successfully cloned into my cells, they bacteria will be able to grow on the plate laced with ampicillin. Here's hoping!